Articles in this section

Import configuration


  • ValConnect installed on a Laptop
  • A USB cable connecting the device and laptop
  • 24VDC power to the device

Import configuration

  1. Start ValConnect
  2. Click connect and select the device
  3. Wait a few seconds while the configuration is being read from the device
  4. Click "Import config file" and select the configuration file
  5. Select "Write to device"

Was this article helpful?
0 out of 0 found this helpful

  • Our helpline hours:

    8:00 - 16:00 CET Monday to Thursday; 8:00 - 15:00 CET Friday